 |
 |
 |
 |
 |
 |
 |
 |
Google translate Use original English text as reference! |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Introduction - Second generation of Aerial Photo Systems
Aerial Photography Systems from Aero Drum ltd are a result of 5 years of making & testing. From choosing the right materials to a complete product everything went trough a real life test. Personally with our Aerial Photo Systems we have made more than 20.000 Aerial Photos in all weather conditions. From -10 to +50 Celsius. In moderate and higher wind conditions.
With the first generation and classical zeppelin shape we have started
to collect necessary data to make better systems. Aldo we have worked more than
2 years with such systems several problems where detected:
1. Wind resistance up to 5-6 miles/h when one directional winds
2. Electrostatic charge of the envelope affected electronic equipment
3. After certain wind velocity “falling bomb” effect was detected
4. Huge helium consumption
5. Storage problem
So in January 2007 we have tested a new Aerial Photo System type (second
generation). All the above problems where dramatically reduced or completely
disappeared. Based on those experiences now we are making three system types:
 |
 |
Advantages of Balloon Aerial Photography Systems compared to other Aerial Photo Systems
1. Vibration free 2. Extremely low cost in exploitation 3. Easy to handle and work with 4. Low cost in maintenance 5. No special permits needed 6. No danger for you and others 7. Can be lifted in heavy populated areas with no risk 8. Low helium loss 9. Easy to move from one angle to another 10. Ready for work in 15 minutes. Let us know when you identify other advantages.....
Video and Photo Gallery for the MA-01-07 DS1 Aerial Photo System
- Size: 3x3x2m Ellipsoid
- Balloon made of Polyurethane with minimum helium loss
- Reinforced juncture points with added Desmodur RFE for better temperature resistance up to -15° to 75° Celsius
.- All the hooks and attachments made of 370 g/m2 reinforced 3 ply
- One way filling/refilling valve
- Reinforced top and bottom juncture finish points
- Sail app 3m 2 made of 50% till easy to mount/unmount
- Aluminum body
- Pan/tilt/zoom and photo trigger RC controlled set
- 360 degrees Pan and 120 degrees tilt
- 4 servos Graupner or Futaba
- 1000 mW 12 V video sender with added fan cooler 12 V – 2.4 MHz allowed for civilian use
- Mechanical Gyro device for leveling the Camera rig
- 4 channels RC receiver with 1 km minimum range (Graupner or Futaba)
- 1xNiMH 12 V 3000 mAh battery sets (One battery charge enough for minimum 2 hours of in air autonomy)
- Aluminum Camera rig holder to attach the Camera rig to the balloon
- Elastic battery holder for easy battery replacement
- Micro Camera in line with the viewfinder (For certain SLR models) to send the live signal to the ground
- RC sender 4 channels
- 7 inch wide LCD color monitor
- 12 V 7.200 mAh Pb ground unit power battery (autonomy minimum 7 hours)
- 1000 mW video receiver 2.4 MHz allowed for civilian use
- Mobile equipment type
- 200 m of special reinforced tether line
- Hooks and aluminum attachments
- 1.5 m filling hose (from helium container to the Balloon valve)
- One day live field test before packing the system if requested
Note: the System is ready to go except for the Helium and Camera.
Production time: up to 20 days after first payment
Payment method: 50% to start production and 50% + transport costs before shipment
Transport costs: Depending on country
 |
Info Email |
 |
 |
 |
- Size: 2.85x2.85x1.87 m Ellipsoid
- Balloon made of Polyurethane with minimum helium loss
- Reinforced juncture points with added Desmodur RFE for better temperature resistance from -15° to 75° Celsius
- Color White
- All the hooks and attachments made of 370 g/m2 reinforced 3 ply
- One way filling/refilling valve
- Reinforced top and bottom juncture finish points
- Sail app 5m 2 made of 50% Till easy to mount/unmount
- Aluminum body
- Pan/tilt/zoom and photo trigger RC controlled set
- 360 degrees Pan and 120 degrees tilt
- 4 servos Graupner or Futaba
- 1000 mW 12 V video sender with added fan cooler 12 V - 2.4 MHz allowed for civilian use
- Mechanical Gyro device for leveling the Camera rig
- 4 channels RC receiver with 1 km minimum range (Graupner or Futaba)
- 1x NiMH 12 V 3000 mAh battery sets (One battery charge enough for minimum 2 hours of in air autonomy)
- Aluminum Camera rig holder to attach the Camera rig to the balloon
- Elastic battery holder for easy battery replacement
- RC sender 4 channels
- 7 inch wide LCD color monitor
- 12 V 7.200 mAh Pb ground unit power battery (autonomy minimum 7 hours)
- 1000 mW video receiver 2.4 MHz allowed for civilian use
- Mobile equipment type
- 150 m of special reinforced tether line
- Hooks and aluminum attachments
- 1.5 m filling hose (from helium container to the Balloon valve)
- One day live field test before packing the system if requested
Note: the System is ready to go except for the Helium and Camera.
Production time: up to 20 days after first payment
Payment method: 50% to start production and 50% + transport costs before shipment
Transport costs: Depending on country
|
Info Email |
 |
 |
 |
- Size: 2.5x2.5x2m Ellipsoid
- Balloon made of Polyurethane with minimum helium loss
- Reinforced juncture points with added Desmodur RFE for better temperature resistance up to -15° to 75° Celsius
.- All the hooks and attachments made of 370 g/m2 reinforced 3 ply
- One way filling/refilling valve
- Reinforced top and bottom juncture finish points
Camera rig
- Aluminum body
- Pan/tilt/zoom and photo trigger RC controlled set
- 360 degrees Pan and 120 degrees tilt
- 4 servos Graupner or Futaba
- 600 mW 12 V video sender with added fan cooler 12 V – 2.4 MHz allowed for civilian use
- Mechanical Gyro device for leveling the Camera rig
- 4 channels RC receiver with 1 km minimum range (Graupner or Futaba)
- 1xNiMH 12 V 3000 mAh battery sets (One battery charge enough for minimum 2 hours of in air autonomy)
- Aluminum Camera rig holder to attach the Camera rig to the balloon
- Elastic battery holder for easy battery replacement
- RC sender 4 channels
- 7 inch wide LCD color monitor
- 12 V 4000 mAh Pb ground unit power battery (autonomy minimum 5 hours)
- 600 mW video receiver 2.4 MHz allowed for civilian use
- Mobile equipment type
- 100 m of special reinforced tether line
- Hooks and aluminum attachments
- 1.5 m filling hose (from helium container to the Balloon valve)
- One day live field test before packing the system if requested
Note: the System is ready to go except for the Helium and Camera.
Production time: up to 20 days after first payment
Payment method: 50% to start production and 50% + transport costs before shipment
Transport costs: Depending on country
|
Info Email |
Ae
                     |